A wonderful and economical flooring option for any outdoor area, such as a parking garage is the epoxy flooring. This type of flooring is quickly becoming the choice among homeowners on account of its appearance, the fact that it is easy to clean, it is safe, it is durable and it can be used to cover up any flooring type. Even though epoxy flooring makes a terrific option for garages, the latest batch of do-it-yourself kits available on the market today makes it a feasible alternative for sidewalks, basements, porches, breezeways and patios. To overcome the epoxy flooring’s propensity for becoming slippery when wet, additives such as quartz sand can be added for texture or to give you a variety of color options.
Choosing the Right Flooring for You
As with any do-it-yourself project, do your homework on the different types of epoxy flooring available and which one would be best for you to choose. In areas where there is a small amount of foot traffic, you can use a sidewalk or porch paint with epoxy additives. For areas where there is a huge amount of traffic, then a dual component epoxy floor layer will be the best choice for you. Also, there is a grade of epoxy flooring available for commercial use. This kind of epoxy flooring can endure damage from heavier traffic or chemical overflow.
More Relating to Epoxy Flooring
Epoxy is a powerful adhesive that is formed when a softener and a hardener is combined. Together, they form flooring that is beautiful and sturdy. You can obtain a do-it-yourself kit from almost any hardware store or home center. The kit usually includes: an epoxy base coat, a top coat, a hardening agent and an etching compound. All instructions on the box must be read and followed precisely in order to receive optimum result. Even though the epoxy flooring can be a do-it-yourself project for you, keep in mind that you will still be handling chemicals that react with each other in definitive ways. Do not skip any steps or take any shortcuts because it may produce the opposite effect.
Laying your DIY Epoxy Flooring
Make sure that the floor you are applying the epoxy on is completely clean and free from moisture, stains and marks of any kind. Your existing floor should be washed and all grease thoroughly removed. First, disperse etching solution over the entire surface that you will be working on. Next, all the solution should be removed entirely. Putting down your new epoxy flooring can be done in two steps. Mix the base coat and the hardening agent together, and then spread it on the floor before it gets hard. A top coat is placed over the epoxy solution once it is dry to provide a hardened, transparent shield.
Preserving your Epoxy Flooring
Your epoxy flooring will conform to the concrete if the floor was prepared properly. Too much moisture from below or intense heat from above is practically the only thing that will unfasten it. The part that will need a little attention since it receives the most abuse is the clear top coat. Maintaining and cleaning it will keep abrasion from eroding the coating. Sanitizing spills immediately, especially those that are chemical or petroleum in nature will put an end to the top coat softening. Throughout the years, the top coat may eventually be worn down or blurry. Simply follow the instructions for applying a fresh coating.
Alternative to Epoxy Flooring
In addition, you can have beautiful looking concrete floors by way of polishing. Polished concrete floors can still produce the same benefits as epoxy flooring. Some advantages to polishing your concrete floor would be as follows:
• It looks beautiful aesthetically
• Manageable, easy to maintain
• Can endure heavy traffic
• Have a variety of choices available
• It is a cost-effective option
• Increases lighting
• Slip and stain resistance
• It is Environmentally friendly
These are just some of the advantages of polishing your concrete. If you are looking for a choice that can make you unique, concrete polishing is the way to go.